From 7d7389cac55952fcb794d2632747a8adc1e119ee Mon Sep 17 00:00:00 2001 From: Dien-Nhung Nguyen-Phu Date: Wed, 15 May 2024 12:43:35 +0700 Subject: init blink project generated project from EVT --- .../StdPeriphDriver/inc/CH58x_gpio.h | 274 +++++++++++++++++++++ 1 file changed, 274 insertions(+) create mode 100644 CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h (limited to 'CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h') diff --git a/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h new file mode 100644 index 0000000..f5072ce --- /dev/null +++ b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_gpio.h @@ -0,0 +1,274 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : CH57x_gpio.h + * Author : WCH + * Version : V1.2 + * Date : 2021/11/17 + * Description + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ + +#ifndef __CH58x_GPIO_H__ +#define __CH58x_GPIO_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief GPIO_pins_define + */ +#define GPIO_Pin_0 (0x00000001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 (0x00000002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 (0x00000004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 (0x00000008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 (0x00000010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 (0x00000020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 (0x00000040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 (0x00000080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 (0x00000100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 (0x00000200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 (0x00000400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 (0x00000800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 (0x00001000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 (0x00002000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 (0x00004000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 (0x00008000) /*!< Pin 15 selected */ +#define GPIO_Pin_16 (0x00010000) /*!< Pin 16 selected */ +#define GPIO_Pin_17 (0x00020000) /*!< Pin 17 selected */ +#define GPIO_Pin_18 (0x00040000) /*!< Pin 18 selected */ +#define GPIO_Pin_19 (0x00080000) /*!< Pin 19 selected */ +#define GPIO_Pin_20 (0x00100000) /*!< Pin 20 selected */ +#define GPIO_Pin_21 (0x00200000) /*!< Pin 21 selected */ +#define GPIO_Pin_22 (0x00400000) /*!< Pin 22 selected */ +#define GPIO_Pin_23 (0x00800000) /*!< Pin 23 selected */ +#define GPIO_Pin_All (0xFFFFFFFF) /*!< All pins selected */ + +/** + * @brief Configuration GPIO Mode + */ +typedef enum +{ + GPIO_ModeIN_Floating, //浮空输入 + GPIO_ModeIN_PU, //上拉输入 + GPIO_ModeIN_PD, //下拉输入 + GPIO_ModeOut_PP_5mA, //推挽输出最大5mA + GPIO_ModeOut_PP_20mA, //推挽输出最大20mA + +} GPIOModeTypeDef; + +/** + * @brief Configuration GPIO IT Mode + */ +typedef enum +{ + GPIO_ITMode_LowLevel, //低电平触发 + GPIO_ITMode_HighLevel, //高电平触发 + GPIO_ITMode_FallEdge, //下降沿触发 + GPIO_ITMode_RiseEdge, //上升沿触发 + +} GPIOITModeTpDef; + +/** + * @brief GPIOA端口引脚模式配置 + * + * @param pin - PA0-PA15 + * @param mode - 输入输出类型 + */ +void GPIOA_ModeCfg(uint32_t pin, GPIOModeTypeDef mode); + +/** + * @brief GPIOB端口引脚模式配置 + * + * @param pin - PB0-PB23 + * @param mode - 输入输出类型 + */ +void GPIOB_ModeCfg(uint32_t pin, GPIOModeTypeDef mode); + +/** + * @brief GPIOA端口引脚输出置低 + * + * @param pin - PA0-PA15 + */ +#define GPIOA_ResetBits(pin) (R32_PA_CLR |= pin) + +/** + * @brief GPIOA端口引脚输出置高 + * + * @param pin - PA0-PA15 + */ +#define GPIOA_SetBits(pin) (R32_PA_OUT |= pin) + +/** + * @brief GPIOB端口引脚输出置低 + * + * @param pin - PB0-PB23 + */ +#define GPIOB_ResetBits(pin) (R32_PB_CLR |= pin) + +/** + * @brief GPIOB端口引脚输出置高 + * + * @param pin - PB0-PB23 + */ +#define GPIOB_SetBits(pin) (R32_PB_OUT |= pin) + +/** + * @brief GPIOA端口引脚输出电平翻转 + * + * @param pin - PA0-PA15 + */ +#define GPIOA_InverseBits(pin) (R32_PA_OUT ^= pin) + +/** + * @brief GPIOB端口引脚输出电平翻转 + * + * @param pin - PB0-PB23 + */ +#define GPIOB_InverseBits(pin) (R32_PB_OUT ^= pin) + +/** + * @brief GPIOA端口32位数据返回，低16位有效 + * + * @return GPIOA端口32位数据 + */ +#define GPIOA_ReadPort() (R32_PA_PIN) + +/** + * @brief GPIOB端口32位数据返回，低24位有效 + * + * @return GPIOB端口32位数据 + */ +#define GPIOB_ReadPort() (R32_PB_PIN) + +/** + * @brief GPIOA端口引脚状态，0-引脚低电平，(!0)-引脚高电平 + * + * @param pin - PA0-PA15 + * + * @return GPIOA端口引脚状态 + */ +#define GPIOA_ReadPortPin(pin) (R32_PA_PIN & (pin)) + +/** + * @brief GPIOB端口引脚状态，0-引脚低电平，(!0)-引脚高电平 + * + * @param pin - PB0-PB23 + * + * @return GPIOB端口引脚状态 + */ +#define GPIOB_ReadPortPin(pin) (R32_PB_PIN & (pin)) + +/** + * @brief GPIOA引脚中断模式配置 + * + * @param pin - PA0-PA15 + * @param mode - 触发类型 + */ +void GPIOA_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode); + +/** + * @brief GPIOB引脚中断模式配置 + * + * @param pin - PB0-PB23 + * @param mode - 触发类型 + */ +void GPIOB_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode); + +/** + * @brief 读取GPIOA端口中断标志状态 + * + * @return GPIOA端口中断标志状态 + */ +#define GPIOA_ReadITFlagPort() (R16_PA_INT_IF) + +/** + * @brief 读取GPIOB端口中断标志状态 + * + * @return GPIOB端口中断标志状态 + */ +#define GPIOB_ReadITFlagPort() ((R16_PB_INT_IF & (~((GPIO_Pin_22 | GPIO_Pin_23) >> 14))) | ((R16_PB_INT_IF << 14) & (GPIO_Pin_22 | GPIO_Pin_23))) + +/** + * @brief 读取GPIOA端口引脚中断标志状态 + * + * @param pin - PA0-PA15 + * + * @return GPIOA端口引脚中断标志状态 + */ +#define GPIOA_ReadITFlagBit(pin) (R16_PA_INT_IF & (pin)) + +/** + * @brief 读取GPIOB端口引脚中断标志状态 + * + * @param pin - PB0-PB23 + * + * @return GPIOB端口引脚中断标志状态 + */ +#define GPIOB_ReadITFlagBit(pin) (R16_PB_INT_IF & ((pin) | (((pin) & (GPIO_Pin_22 | GPIO_Pin_23)) >> 14))) + +/** + * @brief 清除GPIOA端口引脚中断标志状态 + * + * @param pin - PA0-PA15 + */ +#define GPIOA_ClearITFlagBit(pin) (R16_PA_INT_IF = pin) + +/** + * @brief 清除GPIOB端口引脚中断标志状态 + * + * @param pin - PB0-PB23 + */ +#define GPIOB_ClearITFlagBit(pin) (R16_PB_INT_IF = ((pin) | (((pin) & (GPIO_Pin_22 | GPIO_Pin_23)) >> 14))) + +/** + * @brief 外设功能引脚映射 + * + * @param s - 是否使能映射 + * @param perph - RB_RF_ANT_SW_EN - RF antenna switch control output on PB16/PB17/PB18/PB19/PB20/PB21 + * RB_PIN_U0_INV - RXD0/RXD0_/TXD0/TXD0_ invert input/output + * RB_PIN_INTX - INTX: INT24/INT25 PB8/PB9 -> INT24_/INT25_ PB22/PB23 + * RB_PIN_MODEM - MODEM: PB1/PB5 -> PB14/PB15 + * RB_PIN_I2C - I2C: PB13/PB12 -> PB21/PB20 + * RB_PIN_PWMX - PWMX: PA12/PA13/PB4/PB6/PB7 -> PA6/PA7/PB1/PB2/PB3 + * RB_PIN_SPI0 - SPI0: PA12/PA13/PA14/PA15 -> PB12/PB13/PB14/PB15 + * RB_PIN_UART3 - UART3: PA4/PA5 -> PB20/PB21 + * RB_PIN_UART2 - UART2: PA6/PA7 -> PB22/PB23 + * RB_PIN_UART1 - UART1: PA8/PA9 -> PB12/PB13 + * RB_PIN_UART0 - UART0: PB4/PB7 -> PA15/PA14 + * RB_PIN_TMR3 - TMR2: PA9 -> PB23 + * RB_PIN_TMR2 - TMR2: PA11 -> PB11 + * RB_PIN_TMR1 - TMR1: PA10 -> PB10 + * RB_PIN_TMR0 - TMR0: PA9 -> PB23 + */ +void GPIOPinRemap(FunctionalState s, uint16_t perph); + +/** + * @brief 模拟外设GPIO引脚功能控制 + * + * @param s - 是否启用模拟外设功能 + * @param perph - RB_PIN_ADC8_9_IE - ADC/TKEY 9/8通道 + * RB_PIN_ADC6_7_IE - ADC/TKEY 7/6通道 + * RB_PIN_ADC10_IE - ADC/TKEY 10通道 + * RB_PIN_ADC11_IE - ADC/TKEY 11 通道 + * RB_PIN_USB2_DP_PU - USB2 U2D+引脚内部上拉电阻 + * RB_PIN_USB2_IE - USB2引脚 + * RB_PIN_USB_DP_PU - USB UD+引脚内部上拉电阻 + * RB_PIN_USB_IE - USB 引脚 + * RB_PIN_ADC0_IE - ADC/TKEY 0 通道 + * RB_PIN_ADC1_IE - ADC/TKEY 1 通道 + * RB_PIN_ADC12_IE - ADC/TKEY 12 通道 + * RB_PIN_ADC13_IE - ADC/TKEY 13 通道 + * RB_PIN_XT32K_IE - 32KHz晶振LSE引脚 + * RB_PIN_ADC2_3_IE - ADC/TKEY 2/3 通道 + * RB_PIN_ADC4_5_IE - ADC/TKEY 4/5 通道 + */ +void GPIOAGPPCfg(FunctionalState s, uint16_t perph); + +#ifdef __cplusplus +} +#endif + +#endif // __CH58x_GPIO_H__ -- cgit v1.2.3