From 7d7389cac55952fcb794d2632747a8adc1e119ee Mon Sep 17 00:00:00 2001 From: Dien-Nhung Nguyen-Phu Date: Wed, 15 May 2024 12:43:35 +0700 Subject: init blink project generated project from EVT --- .../StdPeriphDriver/inc/CH58x_pwr.h | 167 +++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h (limited to 'CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h') diff --git a/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h new file mode 100644 index 0000000..abf4d08 --- /dev/null +++ b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/CH58x_pwr.h @@ -0,0 +1,167 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : CH57x_pwr.h + * Author : WCH + * Version : V1.2 + * Date : 2021/11/17 + * Description + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ + +#ifndef __CH58x_PWR_H__ +#define __CH58x_PWR_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Peripher CLK control bit define + */ +#define BIT_SLP_CLK_TMR0 (0x00000001) /*!< TMR0 peripher clk bit */ +#define BIT_SLP_CLK_TMR1 (0x00000002) /*!< TMR1 peripher clk bit */ +#define BIT_SLP_CLK_TMR2 (0x00000004) /*!< TMR2 peripher clk bit */ +#define BIT_SLP_CLK_TMR3 (0x00000008) /*!< TMR3 peripher clk bit */ +#define BIT_SLP_CLK_UART0 (0x00000010) /*!< UART0 peripher clk bit */ +#define BIT_SLP_CLK_UART1 (0x00000020) /*!< UART1 peripher clk bit */ +#define BIT_SLP_CLK_UART2 (0x00000040) /*!< UART2 peripher clk bit */ +#define BIT_SLP_CLK_UART3 (0x00000080) /*!< UART3 peripher clk bit */ +#define BIT_SLP_CLK_SPI0 (0x00000100) /*!< SPI0 peripher clk bit */ +//#define BIT_SLP_CLK_SPI1 (0x00000200) /*!< SPI1 peripher clk bit */ +#define BIT_SLP_CLK_PWMX (0x00000400) /*!< PWMX peripher clk bit */ +//#define BIT_SLP_CLK_LCD (0x00000800) /*!< LCD peripher clk bit */ +#define BIT_SLP_CLK_USB (0x00001000) /*!< USB peripher clk bit */ +//#define BIT_SLP_CLK_ETH (0x00002000) /*!< ETH peripher clk bit */ +//#define BIT_SLP_CLK_LED (0x00004000) /*!< LED peripher clk bit */ +#define BIT_SLP_CLK_BLE (0x00008000) /*!< BLE peripher clk bit */ + +#define BIT_SLP_CLK_RAMX (0x10000000) /*!< main SRAM RAM16K peripher clk bit */ +#define BIT_SLP_CLK_RAM2K (0x20000000) /*!< RAM2K peripher clk bit */ +#define BIT_SLP_CLK_ALL (0x3000FFFF) /*!< All peripher clk bit */ + +/** + * @brief unit of controllable power supply + */ +#define UNIT_SYS_LSE RB_CLK_XT32K_PON // 外部32K 时钟振荡 +#define UNIT_SYS_LSI RB_CLK_INT32K_PON // 内部32K 时钟振荡 +#define UNIT_SYS_HSE RB_CLK_XT32M_PON // 外部32M 时钟振荡 +#define UNIT_SYS_PLL RB_CLK_PLL_PON // PLL 时钟振荡 + +/** + * @brief wakeup mode define + */ +typedef enum +{ + Short_Delay = 0, + Long_Delay, + +} WakeUP_ModeypeDef; + +/** + * @brief wakeup mode define + */ +typedef enum +{ + /* 下面等级将使用高精度监控，210uA消耗 */ + HALevel_1V9 = 0, // 1.7-1.9 + HALevel_2V1, // 1.9-2.1 + HALevel_2V3, // 2.1-2.3 + HALevel_2V5, // 2.3-2.5 + + /* 下面等级将使用低功耗监控，1uA消耗 */ + LPLevel_1V8 = 0x80, + LPLevel_1V9, + LPLevel_2V0, + LPLevel_2V1, + LPLevel_2V2, + LPLevel_2V3, + LPLevel_2V4, + LPLevel_2V5, + +} VolM_LevelypeDef; + +/** + * @brief 启用内部DC/DC电源，用于节约系统功耗 + * + * @param s - 是否打开DCDC电源 + */ +void PWR_DCDCCfg(FunctionalState s); + +/** + * @brief 可控单元模块的电源控制 + * + * @param s - 是否打开电源 + * @param unit - please refer to unit of controllable power supply + */ +void PWR_UnitModCfg(FunctionalState s, uint8_t unit); + +/** + * @brief 外设时钟控制位 + * + * @param s - 是否打开对应外设时钟 + * @param perph - please refer to Peripher CLK control bit define + */ +void PWR_PeriphClkCfg(FunctionalState s, uint16_t perph); + +/** + * @brief 睡眠唤醒源配置 + * + * @param s - 是否打开此外设睡眠唤醒功能 + * @param perph - 需要设置的唤醒源 + * RB_SLP_USB_WAKE - USB 为唤醒源 + * RB_SLP_RTC_WAKE - RTC 为唤醒源 + * RB_SLP_GPIO_WAKE - GPIO 为唤醒源 + * RB_SLP_BAT_WAKE - BAT 为唤醒源 + * @param mode - refer to WakeUP_ModeypeDef + */ +void PWR_PeriphWakeUpCfg(FunctionalState s, uint8_t perph, WakeUP_ModeypeDef mode); + +/** + * @brief 电源监控 + * + * @param s - 是否打开此功能 + * @param vl - refer to VolM_LevelypeDef + */ +void PowerMonitor(FunctionalState s, VolM_LevelypeDef vl); + +/** + * @brief 低功耗-Idle模式 + */ +void LowPower_Idle(void); + +/** + * @brief 低功耗-Halt模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源 + */ +void LowPower_Halt(void); + +/** + * @brief 低功耗-Sleep模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源 + * @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开 + * + * @param rm - 供电模块选择 + * RB_PWR_RAM2K - 2K retention SRAM 供电 + * RB_PWR_RAM16K - 16K main SRAM 供电 + * RB_PWR_EXTEND - USB 和 BLE 单元保留区域供电 + * RB_PWR_XROM - FlashROM 供电 + * NULL - 以上单元都断电 + */ +void LowPower_Sleep(uint8_t rm); + +/** + * @brief 低功耗-Shutdown模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源 + * @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开 + * + * @param rm - 供电模块选择 + * RB_PWR_RAM2K - 2K retention SRAM 供电 + * RB_PWR_RAM16K - 16K main SRAM 供电 + * NULL - 以上单元都断电 + */ +void LowPower_Shutdown(uint8_t rm); + +#ifdef __cplusplus +} +#endif + +#endif // __CH58x_PWR_H__ -- cgit v1.2.3