Merge pull request #10 from kienvo/led-scan

Add basic Charlieplexing scan

1 files changed, 190 insertions, 0 deletions

diff --git a/CH5xx_ble_firmware_library/StdPeriphDriver/inc/ISP583.h b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/ISP583.h
new file mode 100644
index 0000000..e228c07
--- /dev/null
+++ b/CH5xx_ble_firmware_library/StdPeriphDriver/inc/ISP583.h
@@ -0,0 +1,190 @@
+/* CH583 Flash-ROM & Data-Flash  */

+/* Website:  http://wch.cn       */

+/* Email:    tech@wch.cn         */

+/* Author:   W.ch 2020.06        */

+/* V1.0 FlashROM library for USER/BOOT */

+/* for the target in USER code area on the chip divided into USER code area and BOOT area */

+/* 用于具有用户代码区和引导区的芯片、操作目标为用户代码区的情况，

+   可以在用户代码中被调用（IAP，擦写自身），也可以在引导代码中被调用（更新用户代码） */

+

+/* Flash-ROM feature:

+     for store program code, support block erasing, dword and page writing, dword verifying, unit for Length is byte,

+     minimal quantity for write or verify is one dword (4-bytes),

+     256 bytes/page for writing, FLASH_ROM_WRITE support one dword or more dword writing, but multiple of 256 is the best,

+     4KB (4096 bytes) bytes/block for erasing, so multiple of 4096 is the best */

+

+/* Data-Flash(EEPROM) feature:

+     for store data, support block erasing, byte and page writing, byte reading,

+     minimal quantity for write or read is one byte,

+     256 bytes/page for writing, EEPROM_WRITE support one byte or more byte writing, but multiple of 256 is the best,

+     0.25KB/4KB (256/4096 bytes) bytes/block for erasing, so multiple of 256 or 4096 is the best */

+

+

+#ifndef EEPROM_PAGE_SIZE

+#define EEPROM_PAGE_SIZE    256                       // Flash-ROM & Data-Flash page size for writing

+#define EEPROM_BLOCK_SIZE   4096                      // Flash-ROM & Data-Flash block size for erasing

+#define EEPROM_MIN_ER_SIZE  EEPROM_PAGE_SIZE          // Data-Flash minimal size for erasing

+//#define EEPROM_MIN_ER_SIZE  EEPROM_BLOCK_SIZE         // Flash-ROM  minimal size for erasing

+#define EEPROM_MIN_WR_SIZE  1                         // Data-Flash minimal size for writing

+#define EEPROM_MAX_SIZE     0x8000                    // Data-Flash maximum size, 32KB

+#endif

+#ifndef FLASH_MIN_WR_SIZE

+#define FLASH_MIN_WR_SIZE   4                         // Flash-ROM minimal size for writing

+#endif

+#ifndef FLASH_ROM_MAX_SIZE

+#define FLASH_ROM_MAX_SIZE  0x070000                  // Flash-ROM maximum program size, 448KB

+#endif

+

+#ifndef CMD_FLASH_ROM_SW_RESET

+// CMD_* for caller from FlashROM or RAM, auto execute CMD_FLASH_ROM_SW_RESET before command

+

+#define CMD_FLASH_ROM_START_IO	0x00		// start FlashROM I/O, without parameter

+#define CMD_FLASH_ROM_SW_RESET	0x04		// software reset FlashROM, without parameter

+#define CMD_GET_ROM_INFO		0x06		// get information from FlashROM, parameter @Address,Buffer

+#define CMD_GET_UNIQUE_ID		0x07		// get 64 bit unique ID, parameter @Buffer

+#define CMD_FLASH_ROM_PWR_DOWN	0x0D		// power-down FlashROM, without parameter

+#define CMD_FLASH_ROM_PWR_UP	0x0C		// power-up FlashROM, without parameter

+#define CMD_FLASH_ROM_LOCK		0x08		// lock(protect)/unlock FlashROM data block, return 0 if success, parameter @StartAddr

+// StartAddr: 0=unlock all, 1=lock boot code, 3=lock all code and data

+

+#define CMD_EEPROM_ERASE		0x09		// erase Data-Flash block, return 0 if success, parameter @StartAddr,Length

+#define CMD_EEPROM_WRITE		0x0A		// write Data-Flash data block, return 0 if success, parameter @StartAddr,Buffer,Length

+#define CMD_EEPROM_READ			0x0B		// read Data-Flash data block, parameter @StartAddr,Buffer,Length

+#define CMD_FLASH_ROM_ERASE		0x01		// erase FlashROM block, return 0 if success, parameter @StartAddr,Length

+#define CMD_FLASH_ROM_WRITE		0x02		// write FlashROM data block, minimal block is dword, return 0 if success, parameter @StartAddr,Buffer,Length

+#define CMD_FLASH_ROM_VERIFY	0x03		// read FlashROM data block, minimal block is dword, return 0 if success, parameter @StartAddr,Buffer,Length

+#endif

+

+#define ROM_CFG_MAC_ADDR	0x7F018			// address for MAC address information

+#define ROM_CFG_BOOT_INFO	0x7DFF8			// address for BOOT information

+

+/**

+ * @brief   execute Flash/EEPROM command, caller from FlashROM or RAM

+ *

+ * @param   cmd         - CMD_* for caller from FlashROM or RAM.

+ * @param   StartAddr   - Address of the data to be process.

+ * @param   Buffer      - Pointer to the buffer where data should be process, Must be aligned to 4 bytes.

+ * @param   Length      - Size of data to be process, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+extern uint32_t FLASH_EEPROM_CMD( uint8_t cmd, uint32_t StartAddr, void *Buffer, uint32_t Length );

+

+/**

+ * @brief   start FlashROM I/O

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_START_IO( )                       FLASH_EEPROM_CMD( CMD_FLASH_ROM_START_IO, 0, NULL, 0 )

+

+/**

+ * @brief   software reset FlashROM

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_SW_RESET( )                       FLASH_EEPROM_CMD( CMD_FLASH_ROM_SW_RESET, 0, NULL, 0 )

+

+/**

+ * @brief   get 6 bytes MAC address

+ *

+ * @param   Buffer      - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define GetMACAddress(Buffer)                       FLASH_EEPROM_CMD( CMD_GET_ROM_INFO, ROM_CFG_MAC_ADDR, Buffer, 0 )

+

+/**

+ * @brief   get 8 bytes BOOT information

+ *

+ * @param   Buffer      - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define GET_BOOT_INFO(Buffer)                       FLASH_EEPROM_CMD( CMD_GET_ROM_INFO, ROM_CFG_BOOT_INFO, Buffer, 0 )

+

+/**

+ * @brief   get 64 bit unique ID

+ *

+ * @param   Buffer      - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define GET_UNIQUE_ID(Buffer)                       FLASH_EEPROM_CMD( CMD_GET_UNIQUE_ID, 0, Buffer, 0 )

+

+/**

+ * @brief   power-down FlashROM

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_PWR_DOWN( )                       FLASH_EEPROM_CMD( CMD_FLASH_ROM_PWR_DOWN, 0, NULL, 0 )

+

+/**

+ * @brief   power-up FlashROM

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_PWR_UP( )                         FLASH_EEPROM_CMD( CMD_FLASH_ROM_PWR_UP, 0, NULL, 0 )

+

+/**

+ * @brief   read Data-Flash data block

+ *

+ * @param   StartAddr   - Address of the data to be read.

+ * @param   Buffer      - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.

+ * @param   Length      - Size of data to be read, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define EEPROM_READ(StartAddr,Buffer,Length)        FLASH_EEPROM_CMD( CMD_EEPROM_READ, StartAddr, Buffer, Length )

+

+/**

+ *

+ * @param   StartAddr   - Address of the data to be erased.

+ * @param   Length      - Size of data to be erased, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define EEPROM_ERASE(StartAddr,Length)              FLASH_EEPROM_CMD( CMD_EEPROM_ERASE, StartAddr, NULL, Length )

+

+/**

+ * @brief   write Data-Flash data block

+ *

+ * @param   StartAddr   - Address of the data to be written.

+ * @param   Buffer      - Pointer to the source buffer, Must be aligned to 4 bytes.

+ * @param   Length      - Size of data to be written, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define EEPROM_WRITE(StartAddr,Buffer,Length)       FLASH_EEPROM_CMD( CMD_EEPROM_WRITE, StartAddr, Buffer, Length )

+

+/**

+ * @brief   erase FlashROM block

+ *

+ * @param   StartAddr   - Address of the data to be erased.

+ * @param   Length      - Size of data to be erased, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_ERASE(StartAddr,Length)           FLASH_EEPROM_CMD( CMD_FLASH_ROM_ERASE, StartAddr, NULL, Length )

+

+/**

+ * @brief   write FlashROM data block, minimal block is dword.

+ *

+ * @param   StartAddr   - Address of the data to be written.

+ * @param   Buffer      - Pointer to the source buffer, Must be aligned to 4 bytes.

+ * @param   Length      - Size of data to be written, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_WRITE(StartAddr,Buffer,Length)    FLASH_EEPROM_CMD( CMD_FLASH_ROM_WRITE, StartAddr, Buffer, Length )

+

+/**

+ * @brief   verify FlashROM data block, minimal block is dword.

+ *

+ * @param   StartAddr   - Address of the data to verify.

+ * @param   Buffer      - Pointer to the source buffer, Must be aligned to 4 bytes.

+ * @param   Length      - Size of data to verify, in bytes.

+ *

+ * @return  0-SUCCESS  (!0)-FAILURE

+ */

+#define FLASH_ROM_VERIFY(StartAddr,Buffer,Length)   FLASH_EEPROM_CMD( CMD_FLASH_ROM_VERIFY, StartAddr, Buffer, Length )

+